Extruders Roll Mills Presses High Speed Mixers Filter Test Blow Molding Pelletizers Co-Ex Blown Film Co-Ex Cast Film Ultra Micro Extruders Contact us for quote

Single Screw Laboratory Extruders:


Single screw laboratory extruders with diameters of 12.5, 20, 25 , 30 and 45mm, all with an L/D ratio of 30. The 12.5mm and 20 mm extruders are available as a table top version. The 25 and 30 mm extruders are available both in vented or non-vented versions with plain screws or equipped with a Maddock mixing section, as well as a pineapple mixer at the screw tip.

         

Request a quote on this line - Click Here!

 

 

                     

About Labtech Engineering

Blown Film Laboratory Lines:


Blown film lines for film lay-flat widths of up to 200 mm. Include features such as a twin-channel cooling ring, nip rolls, variable speed haul-off, slitters and winder.
Co-extrusion lines for films with up to 9 layers. Large film tower with twin pillars, modern design enclosure, pneumatic nip rolls, infinitely variable-speed drive, high-capacity cooling ring, film wind-up, and freestanding central control cabinet incorporating all controls for the tower and extruders.

NOTE:  We have customers running film production on smaller lay flat multi layer films with these lines.

Line shown is (3) 20mm extruders running ABC layers with pancake die, carbon fiber roller collapsing frame and Teflon roller stabilizing cage.  Click link below to see the line in operation.

Co-Ex Blown Film Laboratory Lines: 

Click Here to See VIDEO of line running                                        

Request a quote on this line - Click Here!

 

 

 

                     

Co-Ex Chill Roll Film and Sheet Casting Lines:


Chill roll film and sheet casting lines are available both as floor and bench top versions. Flat die widths range from 125 mm for bench top versions up to 300 mm for floor versions. Dies have adjustable lips for sheet thickness from 0.3 to 1.5 mm or film thickness down to 0.01 mm. All three rolls are hard chromed, mirror polished and cored for water cooling and heating. Polishing roll is pneumatically operated.    Co-extrusion flat film and sheet lines for up to 9 layers. Suitable for producing film and sheet with materials such as PE, PP, PS, ABS, PVC, PET, PC, etc.

 

Click here to see VIDEO of line running         

 

Request a quote on this line - Click Here!

Single Extruder Chill Roll/Sheet Lines

Bench top Chill Roll Film & Sheet Line

                                                                                         

                     

 

Check out our new 12.5mm Co-ex blown and cast film lines

Modular Co-rotating Twin Screw Extruders:


Modular co-rotating twin screw extruders have clam-shell barrels and our unique super hard tool steel barrel inserts. Fully closed barrels are an option. Machines are available with 20 and 26 mm screw diameters and L/D ratios of 32:1 and 40:1.

Click here to see VIDEO of line running

 

Request a quote on this line - Click Here!

 

26MM Twin Screw Extruder

26mm twin screw extruder with water bath and standard pelletizer, equipped with agitated screw feeder and analog controls.

 

CHECK OUT THE NEW MAXI-COMPOUNDER

 

 

                        

 

Turnkey Medical Tubing Line

Click here to see video

                     

16mm Twin Screw Extruder

 

16mm twin screw extruder with water bath and standard pelletizer, equipped with agitated screw feeder and analog controls. 

Click here to see VIDEO of line running at the show.

Request a quote on this line - Click Here!

                     

Optional Twin Screw Extruder Side Feeders

26mm Twin Screw Extruder with (2) optional side two stage agitated metering feeders with lower extruder screw side feeders and main metering feeder for compounding.  Loss in Weight Gravimetric feeders are also available.

Request a quote on this line - Click Here!

 

                     

  

 

 


 

Filter Test Machine

 

Types LFT34-GP and LFT44-GP

with 20 mm Extruder (LE20-30),

Gear Pump and On-Board Computer Control of Filter Tester Unit

Request a quote on this line - Click Here!

 

 

 

                     

Quality Lab Equipment for Quality Labs Click Here for our Line-up

Glossary of Extrusion Terms:

Typical Mixing Screw for Single Screw Extruders,  30:1, Maddock Mixer and Pineapple Mixer

     
 

Call (810) 519-6122 or (810) 516-1700 or (810) 516-1700 for Pricing

Covering Michigan, Ohio, Ind, Ill, Canada for LabTech Engineering Co.
Milabtech LLC 2009

14042 Iroquois Woods Dr.

Fenton, Michigan 48430